Arctic Alumina Adhesive uses a layered composite of aluminum oxide and boron nitride.

Arctic Alumina Adhesive is a pure electrical insulator, neither electrically conductive nor capacitive.

A set of Arctic Alumina Thermal Adhesive consists of two tubes containing a total of 5 grams of adhesive (2.5 grams each of parts
A and B) and a plastic reusable mixing wand. (Approximately 3cc total adhesive.)

Although lighter per set than Arctic Silver Adhesive due to its use of ceramics rather than silver, each set of Arctic Alumina Adhesive 
contains the same amount of adhesive by volume as a set of Arctic Silver adhesive and will cover the same area.

CAUTION! 
Arctic Alumina Thermal Adhesive is a permanent adhesive.
Any components you attach together with Arctic Alumina Thermal Adhesive will stay attached forever.

Arctic Alumina Thermal Adhesive should be kept cold and away from UV light (sunlight and florescent lighting).
We recommend refrigerating the unused material and allowing it to come to room temperature prior to use.

Made with micronized aluminum oxide and boron nitride:
Arctic Alumina uses a layered composite of three unique shapes and sizes of ceramic particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Controlled triple phase viscosity:
Arctic Alumina does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Alumina's consistency is engineered for easy application in a thin even layer. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
NOTE: (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Alumina goes through are much more subtle and ultimately much more effective.)

Absolute Stability:
Arctic Alumina will not separate, run, migrate, or bleed.

Electrical Insulator:
Arctic Alumina Compound is a pure electrical insulator, neither electrically conductive nor capacitive.

Clean Up:
Arctic Alumina Compound cleans off easily from CPUs and heatsinks. In most cases, simply wiping with a dry cloth will easily remove the compound from the CPU and heatsink.

Arctic Alumina is sold in:
1.75 gram tubes. 
(A bit more than 1cc) This is enough compound to cover at least 25 to 35 small CPU cores, or 9 to 15 large CPU cores, or 4 to 8 heat plates. At a layer 0.003" thick, one tube will cover approximately 24 square inches.

3.5 gram tubes. 
(About 2.2cc) At a layer 0.003" thick, one tube will cover approximately 48 square inches.

14 gram tubes 
(About 9cc) At a layer 0.003" thick, one tube will cover approximately 192 square inches.

Compliancy:
RoHS Comliant.

Made with micronized aluminum oxide and boron nitride.
Arctic Alumina uses a layered composite of three unique shapes and sizes of ceramic particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Controlled triple phase viscosity.
Arctic Alumina does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Alumina's consistency is engineered for easy application in a thin even layer. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
NOTE: (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Alumina goes through are much more subtle and ultimately much more effective.)

Absolute Stability.
Arctic Alumina will not separate, run, migrate, or bleed.

Electrical Insulator.
Arctic Alumina Compound is a pure electrical insulator, neither electrically conductive nor capacitive.

Thermal conductivity:  >4.0 W/mK   (Hot Wire Method Per MIL-C-47113)

Thermal Resistance:  <0.010°C-in²/Watt   (0.001 inch layer)

Extended temperature limits:   – 40°C to >180°C

Lower full load core temperatures:
2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads.
When measured with a calibrated thermal diode imbedded in the CPU core.

Clean Up :
Arctic Alumina Compound cleans off easily from CPUs and heatsinks. In most cases, simply wiping with a dry cloth will easily remove the compound from the CPU and heatsink.

Arctic Alumina is sold in:
1.75 gram tubes. 
(A bit more than 1cc) This is enough compound to cover at least 25 to 35 small CPU cores, or 9 to 15 large CPU cores, or 4 to 8 heat plates. At a layer 0.003" thick, one tube will cover approximately 24 square inches.

3.5 gram tubes. 
(About 2.2cc) At a layer 0.003" thick, one tube will cover approximately 48 square inches.

14 gram tubes 
(About 9cc) At a layer 0.003" thick, one tube will cover approximately 192 square inches.

Unique 2-Step Process

ArctiClean 1 Thermal Material Remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU and/or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 Thermal Surface Purifier and some gentle wiping then removes the remaining residue and inhibits flash corrosion on copper or aluminum.

ArctiClean 1 Thermal Material Remover

ArctiClean 1 uses a proprietary combination of non-toxic biodegradable solvents to emulsify thermal greases or thermal pads. The citrus and soy based solvents in ArctiClean 1 match or exceed many hazardous and volatile solvents such as fluorinated and chlorinated organic solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl alcohol, and toluene.

ArctiClean 2 Thermal Surface Purifier

The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material. It also incorporates advanced flash corrosion inhibitors that minimize the corrosion layer on copper and aluminum allowing for more intimate contact between the thermal interface material and the heatsink.

Using ArctiClean 2 With Other Solvents

Most solvents and cleaning products leave residue on the CPU and heatsink that negatively affects the performance of any subsequently applied thermal interface material. ArctiClean 1 Thermal Surface Purifier removes the residue of citrus or petroleum based cleaners and inhibits flash corrosion on a copper or aluminum heatsink.

Arctic Silver 5 Thermal Paste 12g

Features:

Controlled Triple-Phase Viscosity:
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)

Not Electrically Conductive:
Arctic Silver 5 was formulated to conduct heat, not electricity.
(While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)

Absolute Stability:
Arctic Silver 5 will not separate, run, migrate, or bleed.

  Arctic Silver 5 Thermal Paste 3.5g

Controlled Triple-Phase Viscosity:
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the tube, Arctic Silver 5's consistency is engineered for easy application. During the CPU's initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability.
(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)


Not Electrically Conductive:
Arctic Silver 5 was formulated to conduct heat, not electricity.
(While much safer than electrically conductive silver and copper greases, Arctic Silver 5 should be kept away from electrical traces, pins, and leads. While it is not electrically conductive, the compound is very slightly capacitive and could potentially cause problems if it bridges two close-proximity electrical paths.)


Absolute Stability:
Arctic Silver 5 will not separate, run, migrate, or bleed.

High-Density ceramic content:
Ceramique uses a high-density layered composite of five unique shapes of thermally conductive aluminum oxide, boron nitride and zinc oxide sub-micron particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Controlled Triple-Phase Viscosity:
Ceramique does not contain any silicone.
The suspension fluid is a proprietary mixture of advanced polysynthetic oils that provide superior performance and long-term stability.

During the system's initial use, the heat from the CPU lowers the viscosity of the compound to enhance the filling of the microscopic valleys and ensure a minimum bond line between the heatsink and the CPU core. Then the compound thickens slightly over the next 100 to 300 hours of use to its final consistency designed for long-term stability.
(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Ceramique goes through are much more subtle and ultimately much more effective.)

Excellent Stability:
Ceramique is engineered to not separate, run, migrate, or bleed.

Electrical Insulator:
Ceramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.

Performance:
2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.

Easy Clean Up:
Ceramique can easily be cleaned from CPUs and heatsinks with isopropyl alcohol or any of the cleaners listed in the product instructions.




Innovative Dispenser:

The 2.5-gram Ceramique is the first product available in our proprietary thermal compound syringe. Our new syringe is more compact, easier to handle and dispenses a higher percentage of its content than standard industrial or medical syringes. The amount of compound remaining in the syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty.

High-Density ceramic content:
Ceramique uses a high-density layered composite of five unique shapes of thermally conductive aluminum oxide, boron nitride and zinc oxide sub-micron particles to maximize particle-to-particle contact area and thermal transfer. This exclusive combination provides performance exceeding most metal based compounds.

Controlled Triple-Phase Viscosity:
Ceramique does not contain any silicone.

The suspension fluid is a proprietary mixture of advanced polysynthetic oils that provide superior performance and long-term stability.

During the system's initial use, the heat from the CPU lowers the viscosity of the compound to enhance the filling of the microscopic valleys and ensure a minimum bond line between the heatsink and the CPU core. Then the compound thickens slightly over the next 100 to 300 hours of use to its final consistency designed for long-term stability.
(This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool. The viscosity changes that Ceramique goes through are much more subtle and ultimately much more effective.)

Excellent Stability:
Ceramique is engineered to not separate, run, migrate, or bleed.

Electrical Insulator:
Ceramique does not contain any metal or other electrically conductive materials. It is a pure electrical insulator, neither electrically conductive nor capacitive.

Performance:
2 to 10 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.

Easy Clean Up:
Ceramique can easily be cleaned from CPUs and heatsinks with isopropyl alcohol or any of the cleaners listed in the product instructions.

Innovative Dispenser:
The 2.5-gram Ceramique is the first product available in our proprietary thermal compound syringe. Our new syringe is more compact, easier to handle and dispenses a higher percentage of its content than standard industrial or medical syringes. The amount of compound remaining in the syringe is easy to determine as the rear of the plunger is perfectly flush with the flange when the syringe is empty

Thermal Matrix

The unique blend of micronised zinc oxide, aluminium oxide and aluminium particles in silicone base oil forms a thermally conductive matrix that provides class-leading performance and exceptional long-term stability.

Performance Attributes

Matrix's silicone suspension fluid and conductive fillers are engineered for easy application and superior surface wetting. This enhances performance and offers better heat transfer than other Arctic Silver retail market thermal compounds. During initial use, Matrix wets the thermal surfaces and fills the microscopic voids and valleys. With time, pressure, heat and vibration, Matrix achieves superior thermal contact between the surfaces.

Electrical Insulator

Matrix is not electrically conductive.

Performance

Offers 2-12°C lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode embedded in the hottest section of the CPU core.

Break-In Period:

Due to the unique carrier fluid used and the shapes and sizes of the thermally conductive particles in Matrix, it will take a minimum of 300 hours and multiple thermal cycles to achieve maximum particle to particle thermal conduction and for the heatsink to CPU interface to reach maximum conductivity. (This period will be longer in a system without a fan on the heatsink.) On systems measuring actual internal core temperatures via the CPU's internal diode, the measured temperature will often drop significantly over this "break-in" period. This break-in will occur during the normal use of the computer as long as the computer is turned off from time to time and the interface is allowed to cool to room temperature. Once the break-in is complete, the computer can be left on permanently if desired.

Silver Adhesive Features:

Made with 99.8% pure micronized silver.
62% to 65% silver content by weight.
Superior thermal conductivity. Greater than 7.5 W/mK

Temperature range:
- 40C to >150C
(Bond strength is weakened at temperatures
below 0C due to crystallization.)

Negligible electrical conductivity.
Arctic Silver Thermal Adhesive was formulated to
conduct heat, not electricity.
NOTE: Even though Arctic Silver Thermal Adhesive is specifically engineered for high electrical resistance, it should be keep away from electrical traces, pins, and leads. The cured adhesive is slightly capacitive and could potentially cause
problems if it bridged two close-proximityelectrical paths.

Arctic Silver Thermal Adhesive is sold in:
A set of Arctic Silver Thermal Adhesive consists of two tubes containing a total of 7 grams of adhesive
(3.5 grams of Part A and 3.5 grams of Part B) and a plastic reusable mixing wand.

CAUTION!

Arctic Silver Thermal Adhesive is a permanent adhesive. Components you attach with
Arctic Silver Thermal Adhesive will stay attached forever.